Assembly Instructions
1. Locate an open area to unbox the packaged
TreadClimber (Fig.1).
2. Cut all straps to remove the cardboard packaging along
with any protective wrapping to expose the palletized
TreadClimber base (Fig. 2).
3. Move all unattached components off the TreadClimber
base (Fig. 3).
Hardware:
Console Frame
Neck Mast
Handrail Grommets
Upper Handrails (Left & Right)
Handrail Beauty Rings
Lower Handrails (Left & Right)
Rear Corner Shroud (Left & Right)
Hardware Pack
Rear Shroud
Neck Grommet
TREADCLIMBER by STAR TRAC - OWNER'S MANUAL | Assembly Instructions
Fig. 1
Fig. 2
Fig. 3
22