Contact Heart Rate Monitoring; Chest Strap Heart Rate Monitoring - Star Trac E-TC Installation & Owner's Manual

Contact Heart Rate Monitoring

You may use the heart rate contact grips to automatically check your heart rate. Just follow these steps:
1
Grasp the stainless steel heart rate contact grips; you do not have to squeeze tightly.
2
When a heart rate has been detected, the
calculation is taking place.
3
When your heart rate has been acquired, the
(BPM) will be displayed in the Information Window continuously.
4
Release the Heart Rate grips if you wish to remove your heart rate from the display.
NOTE: Contact heart rate may not give accurate BPM.

Chest Strap Heart Rate Monitoring

You may use a heart rate strap ( not included) to automatically check your heart rate. Just follow these steps:
1
Before beginning your workout, or during a pause, moisten the back of the transmitter on the heart rate strap (not
included). Place the strap snugly around your chest with the transmitter resting directly over your sternum.
2
When a heart rate has been detected, the
3
When your heart rate has been acquired, the
per minute (BPM) will be displayed in the Heart Rate Window continuously.
4
Remove the heart rate strap if you wish to remove your heart rate from the display.
NOTE: The performance of the transmitter may be affected by body types, body oils, metal in clothing, and outside
electrical interference. Always be sure that the transmitter and skin are in good contact. Avoid operating other electrical
equipment near your TreadClimber
icon displays in the Information Window, indicating a
icon will begin pulsating, and your heart rate in beats per minute
indicator illuminates, indicating a calculation is taking place.
®
when you use the heart rate strap.
TREADCLIMBER by STAR TRAC - OWNER'S MANUAL | Operating Instructions
indicator will begin pulsating, and your heart rate in beats
41