Star Trac E-TC Installation & Owner's Manual page 29

22. Mount the rear shroud to the TreadClimber base and
secure it in place by installing the corresponding five
Phillips head screws to the top (Fig. 23) and lower
(Fig. 24) sections at the circled locations.
Fig. 23
23. Mount the left & right corner shrouds (Fig. 25) and
secure them in place by installing the corresponding
four Phillips head screws to each shroud at the circled
locations.
24. Mount the rear step shroud (Fig. 26) and wedge the left
& right handrail grommets into the available open
space between the shrouds. Secure the rear step
shroud by installing the corresponding five Phillips
head screws at the circled locations.
TREADCLIMBER by STAR TRAC - OWNER'S MANUAL | Assembly Instructions
Fig. 24
Fig. 25
Fig. 26.
29