Star Trac E-TC Installation & Owner's Manual page 25

10. Slide on the second set of beauty rings (Fig.10) onto
each upper handrail while making sure the radius
cutouts clear the available threaded holes.
11. Slide the console frame onto each upper handrail
(Fig. 11) and rest the center of the console frame on
top of the neck mast plate.
12. Loosely thread four socket head cap screws (Fig. 12)
with washers through the neck mast mount plate on to
the console frame mount plate.
Final Torque:
240 In-Lbs (27 Nm)
o
TREADCLIMBER by STAR TRAC - OWNER'S MANUAL | Assembly Instructions
Fig. 10
Fig. 11
Fig. 12
25