Operating Instructions
Operating the TreadClimber
an article of your clothing, press QUICK START, and begin walking. The belt will begin at 0.5 mph (0.8 km/h) and
the level will be on level 1
IMPORTANT: Before operating the unit, you must be familiar with the following equipment limitations and safety
features.
Maximum Weight: Your TreadClimber is designed for a maximum user weight of 350 lbs/159 kg. DO NOT
exceed the maximum user weight.
S
TOP
SWI
TCH
Emergency Stop: In case of emergency, press the STOP on the Hot Bar or pull the Pull Cord Stop on the Hot
Bar.
Immobilizing the Running Belt: To power the unit, set the ON/OFF power breaker to the ON position. To turn
the unit off, set the ON/OFF power breaker to the OFF position. When the unit is turned off, movement of the
running belt is prevented.
Safety Lockout Feature: Allows you to lock out the TreadClimber. When locked, the display shows the message
"LOCKED, ENTER ID TO UNLOCK". The user must press "0", enter a 5-digit ID number (default=12345), then
press ENTER to unlock the unit. Unit will then operate as normal (NOTE: The unit will lock back up if it is idle for
30 seconds). Use the LOCK OUT option in MAINTENANCE SETTINGS to enable/disable the lock out feature;
use the LOCKOUT ID option to change the default ID (see Settings & Testing).
TREADCLIMBER by STAR TRAC - OWNER'S MANUAL | Operating Instructions
®
is very easy. Simply step onto the treadles, securely attach the pull cord STOP to
ON / OFF POWER BREAKER
32