Setting & Testing; Manager Mode - Star Trac E-TC Installation & Owner's Manual

Settings & Testing
After having used your TreadClimber

Manager Mode

The Manager Mode allows you to query and modify the basic settings of your unit. To enter Manager Mode:
1.
Press and hold the
2.
A beep will sound and "MANAGER MODE" will display momentarily in the Information Window.
3.
Release the keys. "MCI VX.XX CKSM XXXX" will display in the Information Window.
NOTE: The system will automatically exit Manager Mode if no key is pressed for 30 seconds. The following keys are
available in MANAGER MODE:
Incline Keys: Displays the next and previous parameter, respectively. Keys will repeat if held.
Speed Keys: Adjust the value of the displayed parameter up and down, respectively, in increments of
1 unit or 0.01 unit, as appropriate for the parameter. These keys do not save the new value – (see Key
below).
OK Key: Updates (saves) the value of the displayed parameter in Flash memory. Alternatively, the
START key may be used (see above).
Number/Program Select Keys: Enter new data item values for numeric parameters.
Stop Key: Exits Manager Mode and restarts the TreadClimber by STAR TRAC greeting.
The items that you may display and change with the previous keys are:
Item Lowest
Value
MC1 V X.XX N/A
LCB V X.XX N/A
SERIAL NO 0
UNITS -
TIME 5
WEIGHT 1
®
for many workouts, you may wish to change some of its settings
, and
Default Highest Meaning
Value Value
N/A N/A Display's primary processor software version and checksum.
N/A N/A Display's secondary processor software version and checksum.
0 65,535 TreadClimber serial number.
ENGLISH - English = units of pounds, miles, hours, minutes, seconds, feet, inches;
Metric = units of kilograms, kilometers, hours, minutes, seconds,
centimeters.
99 99 Maximum time in minuts allowed for program, including warm-up.
155/70 500/226 Default (to user), typical weight in lb (UNITS=English), or kg
(UNITS=Metric).
TREADCLIMBER by STAR TRAC - OWNER'S MANUAL | Operating Instructions
keys together.
42