Direct-Wire Downloading; Telco Handoff; Figure 6-1: Direct-Wire Downloading Connections - Honeywell ADEMCO VISTA-40 Installation And Setup Manual

2-partitioned security system
Hide thumbs Also See for ADEMCO VISTA-40:
Table of Contents

Advertisement

Direct-Wire Downloading

The VISTA-40 can be downloaded without using a
modem or telephone line by using a 4100SM Serial
Module and Compass Downloading Software. The
direct-wire downloading connection is to be temporary,
and is not part of the permanent installation. Direct-
wire downloading is meant as a tool for the installer
during the installation process.
The connections between the control and the
4100SM are different than those shown in the
4100SM Installation Instructions. See Figure 6-
1 for the correct connections. In addition, in
place of the green wire, referred to in step 2 of
the "IN CASE OF DIFFICULTY" section of the
4100SM Instructions, use the violet wire
instead.

Telco Handoff

Telco handoff is another method of getting on-line with the downloader. The installer or customer enters the User Code
+ [#] + [1], while on the phone line with the computer's modem phone line. The customer will get cut-off and the panel
and download computer will establish a connection.

Figure 6-1: Direct-Wire Downloading Connections

Section 24 - Downloading Primer
Connector J8 on the main PC board (see the Summary
of Connections diagram on the inside back cover of this
manual) is intended to be interfaced to either a local
serial printer (see SECTION 3:Installing the Control) or
a computer. Make connections to a computer as shown
below. Note that the violet wire connection for a
computer differs from that used when connecting
a serial printer.
6-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents