Direct Access; Menu Driven Access; Keypad Menu Timeout; Engineer Mode - Honeywell Galaxy 3-48C Programming Manual

Menu Access
There are two methods of selecting menu options:
1.

Direct Access:

Code + ent + option number + ent.
2.

Menu Driven Access:

Code + ent + A (to select menu level) + ent;
A key (to select menu option) + ent.
Direct Access
Entering a valid menu option number while in the menu immediately moves to that option. For example, press-
ing 52 (type 3.7 only) when the keypad is displaying 22 = DISPLAY LOG moves directly to option
52 = PROGRAM ZONES; Pressing 10 while accessing the PROGRAM ZONES option moves directly
to 10 = Group (group mode must be first enabled in option 63.1). The option number entered must be valid
for the type of the menu structure that is currently being accessed.
Menu Driven Access
Menu driven access allows the engineer (and users) to enter the menu and, by using the A and B keys, navi-
gate through the available options. The options are accessed by pressing the ent key. If you press and hold
the A key it will scroll forward through the options and if you press and hold the B key it will scroll backwards
through the options.

Keypad Menu Timeout

Once the user menu has been accessed (irrespective of user type), if there are no keypresses for two minutes,
then the keypad timeout occurs; the system returns to the banner text.
NOTE: This feature does not apply when the system is in the Walk Test option. If no zones are tested or no
keypresses occur for 20 minutes when Walk Test is selected, then the keypad timeout occurs. In
Menu Option 66 (Pre-check) there is also a 20 minute timeout after the last zone has been acti-
vated.

Engineer Mode

To program the Galaxy 3 Series control panel, the system must be in engineering mode. This allows access to
the engineer menu options 50 = ENGINEER 1, 60 = ENGINEER 2 and 70 = ENGINEER 3.
Galaxy 3 Series Programming Manual
4