Devices Are Not Recognized Under Device Manager; Led Information; Table 5. Led Information - Intel SE7230NH1-E User Manual

Devices are not Recognized under Device Manager

The Windows* operating systems do not include all of the drivers for the Intel chipsets,
onboard NICs, and other components. See
link to the current drivers and chipset files.
Hard Drive(s) are not Recognized
Check the following:
1. Make sure the drive is not disabled in BIOS Setup.
2. Make sure the drive is connected correctly and that is plugged into the power supply.
3. Make sure the drive is compatible. See
link to the tested drives.
4. Make sure you have not exceeded the power budget for the server. See
Information and Software"
5. If using SCSI drives, verify that each SCSI ID number is uniqe on the SCSI bus. See
your drive documentation for details on setting the SCSI ID for your drives.
6. If using IDE drives, verify that the master/slave settings are set correctly. See your
drive documentation for details on setting the master/slave settings.
7. If using a RAID configuration with SCSI or SATA drives, make sure the RAID card is
installed correctly.
Bootable CD-ROM Is Not Detected
Check the following:
•
Make sure the BIOS is configured to allow the CD-ROM to be the first bootable
device.

LED Information

The Intel
your system. A table of these LEDs with a description of their use is listed below.

Table 5. LED Information

LED Name
Power Indicates system power
is on or off
ID Aid in server
identification from the
back panel
®
Intel Server Board SE7230NH1-E and Intel
for a link to software to check your power budget.
®
Server Board SE7230NH1-E includes LEDs that can aid in troubleshooting
Function
Front control
panel
Front control
panel and
board rear left
corner
®
Server Platform SR1475NH1-E User's Guide
"Additional Information and Software"
"Additional Information and Software"
Location LED Color
Green
Blue
for a
for a
"Additional
Notes
Off = Power is off or in
sleep state S5
On = Power is on or in
sleep stats S0
Press ID LED button or use
Server Management
software to turn the LED on
and off.
31