Power Supply; Optional Hardware; Hard Disk Drives - Intel SE7230NH1-E User Manual

Installing only 3 DIMMs is not supported. Do not use DIMMs that are not "matched"
(same type and speed). Use of identical memory parts is always the preferred method.See
the Intel
information regarding the memory sub-system.

Power Supply

A minimum of 350 Watts is required. Your supply must provide a minimum of 1.2A of 5V
standby current or the board will not boot.

Optional Hardware

Hard Disk Drives

The Server Board SE7230NH1-E supports up to four SATA devices.
See the documentation included with your server chassis for additional drive information
and drive installation instructions.
8 Intel® Server Board SE7230NH1-E and Intel® Server Platform SR1475NH1-E User's Guide
®
Server Board SE7230NH1-E Technical Product Specification for additional