Printer Controls - CognitiveTPG A798 User Manual

Printer controls

Con guration switch (DIP switch 1)
The configuration switch allows you to change the configuration settings of the printer.
Paper feed button
During normal use, the paper feed button advances the paper. It is also used to access the configuration menu.
LED
The green LED indicates basic information about the printer status. A steady green light means the printer is on and
operating normally. A flashing LED means the printer needs operator assistance. Refer to the troubleshooting section on
page 30 for more information.
Beep
A single beep means the printer has successfully completed its startup routine. It should beep after being powered up or
reset.
If the printer beeps twice, it may be experiencing a problem. Refer to the troubleshooting guide on page 30 for more
information.
Connector Cover
The connector cover provides protection and strain relief for the printer connectors and cables. This cover should remain
on the printer and utilized as described in Chapter 3, Cable routing.
10/07 10/07
LED
(Green)
Paper
Feed
Button
A798-UG00001 Rev. A A798-UG00001 Rev. A
Chapter 2: About the Printer
A798 Thermal Receipt Printer: User Guide A798 Thermal Receipt Printer: User Guide
7