Chapter 4: Using The Printer; Con Guring The Printer - CognitiveTPG A798 User Manual

Thermal receipt printer

Hide thumbs Also See for A798:

Table of Contents

Chapter 4: Using the Printer

The conﬁguration menu allows the user to set general printer parameters. The test prints the diagnostics form, which

details settings for all functions. The printer will partially cut the paper between each variation.

The printouts may vary for each model. The test ends with a partial cut of the paper. A complete test printout may require

the use of several feet of paper.

Since the printer is usually shipped pre-conﬁgured, most users do not need to change the conﬁguration of the printer. If

you make adjustments to the conﬁguration, be careful not to inadvertently change settings that may affect the printer's

performance. TPG does not recommend that users change the printer conﬁguration.

Additional information on conﬁguring the printer is found in the A798 Programming Guide.

Hint: The printer is shipped with a test printout that includes the preset conﬁguration. If you run into problems after

changing the printer conﬁguration, use these settings as a default. For guidance or assistance, you may contact an TPG

representative.

A798 Thermal Receipt Printer: User Guide

A798-UG00001 Rev. A

10/07

Table of Contents