Table of Contents
Advertisement
Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you
achieve better time management when giving presentations. Follow these steps to
utilize this function:
1.
Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press
MODE/ENTER to display the Presentation Timer page.
2.
Select Timer Period and decide the timer period by pressing
length of time can be set from 1 to 5 minutes in 1-minute increments and 5 to
240 minutes in 5-minute increments.
3.
Press
on the screen by press
Selection
Always
1 Min/2 Min/3
Min
Never
4.
Press
.
Top-Left
5.
Press
counting direction by pressing
Selection
Count Up
Count Down
6.
Press
reminder by pressing
heard at the last 30 seconds of counting down/up, and a triple beep sound will
be produced when the timer is up.
7.
To activate the presentation timer, press
press MODE/ENTER.
8.
A confirmation message displays. Select Yes and press MODE/ENTER to
confirm. You will see the message "Timer is On" displaying on the screen. The
timer starts counting at the time the timer is on.
To cancel the timer, perform the following steps:
1.
Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press
select
displays.
to select Timer Display and choose if you want the timer to show up
ing
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 1/2/3 minute(s).
Hides the timer throughout the presentation time.
to select Timer Position and set the timer position by pressing
Bottom-Left
to select Timer Counting Direction and select your desired
Description
Increases from 0 to the preset time.
Decrease from the preset time to 0.
to select Sound reminder and decide if you want to activate sound
/
. If you select On, a double beep sound will be
to select Off. Press MODE/ENTER. A confirmation message
/
.
Top-Right
Bottom-Right
/
.
and press
/
. The
/
to select On and
Operation
/
37
Advertisement
Table of Contents
