Applied Biosystems Data Explorer 4 Series User Manual page 97

Saving, Opening, and Deleting .SPC Results Files (Mariner Data Only)
Deleting results
for .SPC files
3. Select the .RST or .RCT file to open, then click OK.
NOTE: Saturation Correction is not applied to Mariner
.RST files. For more information, see Section 5.11,
AutoSaturation Correction (Mariner Data Only).
4. Click the Sample Info tab in the Output window to display
the following information for the result file:
• Name of the original raw data file from which the
result file was generated
• Processing functions that were performed and
saved in the result file
Use Windows NT Explorer to delete .RST and .RCT result files
generated from .SPC files.
Data Explorer
™
Software User's Guide
2
2-41