Applied Biosystems Data Explorer 4 Series User Manual page 154

Chapter 3 Peak Detection and Labeling
spectrum labels
3
3-56 Applied Biosystems
8. Click OK.
The trace is displayed. The detected peaks that meet
the peak labeling criteria are labeled.
Setting
To label spectrum peaks:
1. Click the Spectrum window to activate it.
2. From the Peaks menu, select Peak Label.
The Spectrum Peak Label dialog box is displayed
(Figure 3-22).
Figure 3-22 Spectrum Peak Label Dialog Box
3. Select Enable Labeling to label peaks in m/z format.
4. Set the number of decimal points to be displayed.