Applying new
constants to the
data file
If you are
calibrating
Mariner data
Apply
(including
Calibration
MS Method
data)
Voyager data
Apply
Calibration
Apply to All
NOTE: This
button is
displayed only if
you are
calibrating a
Voyager
multispectrum
data file.
NOTE: If you are calibrating Mariner data, see "Ensuring
that masses match during calibration" on page 5-24.
To apply the calibration constants to the data:
Click
All spectra in the data file are calibrated and
displayed with an MC trace label. The calibration
constants are saved with the data file. Each
spectrum in the data file is calibrated when
displayed.
The current spectrum is calibrated and
displayed with an MC trace label. The calibration
constants are saved with the spectrum.
All spectra in the data file are calibrated using
the currently displayed calibration, and are
displayed with an MC trace label. The calibration
constants are saved with the data file. Each
spectrum in the data file is calibrated when
displayed.
NOTE: If you select Apply to All, you overwrite
any calibrations previously applied to individual
spectra by clicking Apply Calibration.
The following occurs
™
Data Explorer
Software User's Guide
Manual Calibration
5-15
5