Applied Biosystems Data Explorer 4 Series User Manual page 227

If you are
calibrating
Voyager Apply Calibration
data
Apply to All
NOTE: This button is
displayed only if you
are calibrating a
Voyager
multispectrum data
file.
Select
The current spectrum is calibrated and
displayed with an MC trace label. The
calibration constants are saved with the
spectrum.
All spectra in the data file are calibrated
using the currently displayed calibration, and
are displayed with an MC trace label. The
calibration constants are saved with the data
file. Each spectrum in the data file is
calibrated when displayed.
If you apply the calibration, the next time you open the
data file, the MC trace label is not displayed.
The following occurs
™
Data Explorer Software User's Guide
Manual Calibration
5-23
5