Applied Biosystems Data Explorer 4 Series User Manual page 329

2. Do either of the following:
• Change the %Max Peak Area from 1 (the default)
to 0, and the %Base Peak Intensity from 0 (the
default) to 1.
• Click the Peak Processing tab and change the
default Integration Baseline Setting from
Valley-to-Valley to Valley-to-Baseline.
3. Click OK.
Figure 7-11 shows the partially resolved peaks that are now
labeled.
Figure 7-11 Partially Resolved Peaks Labeled
Voyager Data Examples
™
Data Explorer Software User's Guide
7
7-13