Installing The Seat Positioning Strap - Invacare Tracer SX5 User Manual

15.3 Installing the Seat Positioning Strap

WARNING
ALWAYS wear your positioning strap. Inasmuch as the Seat Positioning Strap is an option on this wheelchair (You may
order with or without the seat restraint), Invacare strongly recommends ordering the Seat Positioning Strap as an
additional safeguard for the wheelchair user.

For ths procedure, refer to FIGURE 3.
1. Remove the bottom back upholstery screw from the wheelchair.
2. Position the seat positioning strap half between the back cane and back upholstery.
3. Secure the back upholstery and seat positioning strap to the wheelchair with the existing back upholstery screw.
4. Repeat STEPS 1-3 for the opposite side of the wheelchair.
Back Upholstery Screw
Strap Positioning Strap
Part No. 1110550
Back Cane
FIGURE 3 Installing the Seat Positioning Strap
77
15 OPTIONS
Back Upholstery
Tracer
®
SX5