Installing The Wheel Lock Extension Handle - Invacare Tracer SX5 User Manual

15 OPTIONS

15.4 Installing the Wheel Lock Extension Handle

WARNING
If the wheelchair is equipped with push to lock wheel locks, elevating legrests, and wheel lock extension handles, the wheel
lock extension handles MUST be removed before swinging the elevating legrests to the side, otherwise injury or damage
may result. Interference between the top of the elevating legrest and the wheel lock extension handle causes the wheel lock
to disengage.

For this procedure, refer to FIGURE 4
1. Remove the existing rubber tip from the wheel lock handle (Detail "A").
2. Install the extension handle over the wheel lock handle (Detail "B").
Rubber Tip
Wheel Lock Handle
Wheel Lock
®
Tracer SX5
Detail "A"
FIGURE 4 Installing the Wheel Lock Extension Handle
Detail "B"
Wheel Lock
Handle
78
Wheel Lock
Extension
Handle
Wheel Lock
Part No. 1110550