Programming Genie Remote - DirecTV Genie User Manual

Programming Your Genie Remote
1. Make sure your TV is turned on.
2. Make sure the TV to which you want to program your Genie Remote is
turned on.
3. Press MENU on the Remote, then select Settings & Help from the left
menu.
Select Settings from the Settings & Help screen.
4.
5. Select Remote Control from the left menu
6. Select IR/RF Setup.
7. Use the arrow keys to select IR or RF, depending on which Receiver you
wish to pair the remote with, then arrow to select Continue.
8. Follow the onscreen instructions.
For instructions on how to program your remote to an DIRECTV
Television, please visit directv.com/rvu.
If you have set your Genie Remote to RF mode, and wish to reset it to IR
mode, repeat the above steps to #6, choose IR, and follow the onscreen
instructions.
YOUR REMOTE CONTROL
Ready
®
11