Using Your Remote Control
This universal remote control is your touch point to the system, so we'll start here.
Turning Equipment On and Off
Mode Switch
DIRECTV
PLUS
DVR USER GUIDE
®
14
Note:
Each time you press a button, a green light at the top of the remote flashes.
If the light flashes several times for just one press, it means the batteries
(size AA) are getting low and need to be replaced.
These two buttons turn your TV and DIRECTV
together. If your DIRECTV
System was installed professionally, your
®
remote has already been programmed to operate your TV. If you need
to reprogram the remote for a new TV or for any other reason, press
MENU, select Parental, Fav's & Setup, then System Setup, then Remote
Control, and follow the step by step instructions.
Use the POWER (PWR) button and Mode Switch to turn a single
component on or off (for example a DVD player or surround sound
system). Simply slide the mode switch to the position that matches
the component you want to control and then use the POWER button
to turn it off or on. The mode switch must always be in the left-most
position to control your DIRECTV
position that has not been programmed, or if you press a button that
is not supported by that particular piece of equipment, an on-screen
message will pop up to alert you.
Receiver on or off
®
Receiver. If the mode switch is in a
®