DirecTV Genie Mini Activation & Equipment Return Instructions

ACTIVATION & EQUIPMENT
RETURN INSTRUCTIONS
We're committed to bringing you the best in video entertainment every day. Your replacement
Genie ® Mini is enclosed. Here's how to connect and activate it, plus how to return your non-working
equipment.
To avoid non-return fees, follow important return instructions at the end of this document.
1 2
Connect Reset
1 CONNECT YOUR REPLACEMENT GENIE MINI
·
Carefully stack your replacement Genie Mini on top of your non-working Genie Mini.
·
Transfer one connection at a time from the non-working Genie Mini to the replacement
Genie Mini, except for the power cord. Need help? Go to
·
Plug the power cord into the replacement Genie Mini, then into a power outlet. If the receiver
doesn't automatically power up, press the POWER button.
·
Turn on your TV.
2 RESET YOUR REMOTE
·
On the remote, press and hold MUTE and SELECT.
·
The GREEN LED will blink twice.
·
Press 9-8-7 on your remote.
·
The GREEN LED will blink four times if successful.
3 SETUP
·
Select REPLACE A LOCATION, choose the Client you want to remove and select REPLACE.
·
Select YES, REPLACE to confirm your choice.
Note: The new Genie Mini may display a flashing red LED and the screen may flash gray
intermittently during this setup step.
3 4 5
Setup Activate Program
directv.com/equipmentinstall
6
Return
1
2
3
Genie Mini with Genie Mini 2
Instructions can be found online at
directv.com/equipmentinstall or
by scanning the QR code.
Genie Mini
NETWORK
DOLBY
DIGITAL IMAX
HDMI
HDMI
10-pin single
Colored cable ends
end connects
connect to the TV to the receiver
Black component Gray component
cables are for video cables are for audio
Remote
Reset
Replace a Location
Create a New Location
Select whether you would like to add a new location or replace an
existing location.
Add a New Location
Replace a Location
(Continued on back)
Q