HP 200 Service Manual page 132

8 Replace the two indicated screws. (Long dog point screws.)
LEFT HAND SIDE
7 Replace the indicated screw.
Torx-20
LEFT HAND SIDE
6 68 Removal and Replacement
Torx-15
3
9 Replace the screws on the bottom cover.
Torx-20
D/A1 size plotters have four screws.
E/A0 size plotters have five screws.
10 Turn the plotter to its correct position.
5
Before re installing the overdrive
enclosure, ensure that both flags on the
media sensor move freely when you pass
a sheet of media over them.
C2libr2tion: After having reassembled
the plotter, perform the media sensor
calibration.
4
RIGHT HAND SIDE
C3187 90000