Removing The Bail - HP 200 Service Manual

Removing The Bail

1 Open the window.
SO OLOGOHOGOF
3 Push both of the plastic ends of the bail towards each other to release them from the holes in
the sideplates, and lift the bail up and clear of the plotter.
0D2 DmbtinJ: If there are Tef on ashers on
the inside of the eft sidep ate, take care not to
damage them.
6 56 Removal and Replacement
2 Move the cartridge carriage to the
extreme left.
In the following step, take care not to cut yourself
on the encoder strip.
2
1
Push
Cartridge carriage
1
Push
C3187 90000