Advanced Wireless Settings - D-Link DIR-615 User Manual

Section 3 - Coniguration
This section allows you to adjust the advanced settings of your wireless network. It is not recommended that you make changes
in this section unless you are familiar with these settings, or you have been instructed to do so.
Transmit
Set the transmit power of the antennas.
Power:
WLAN
Enabling this feature prevents wireless clients from communicating
Partition:
with each other over the wireless network. Clients will still be able
to communicate with the router and access the Internet, however
communications with other connected wireless clients will be blocked.
WMM Enable:
WMM is QoS for your wireless network. This can help to improve the
quality of video and voice applications for your wireless clients.
HT 40/20
Enable this feature to force the use of the 40 MHz band even in heavily
Coexistence:
congested areas. Enabling this feature may reduce transmission speeds
when there are a number of other wireless N devices operating within
the same vicinity. When disabled, the DIR-615 will drop back to the
slower 20 MHz when heavy congestion is detected on the 40 MHz band.
D-Link DIR-615 User Manual

Advanced Wireless Settings

40