Port Forwarding - D-Link DIR-615 User Manual

Section 3 - Coniguration
This page will allow you to open a single port or a range of ports. Check the box to the left of each rule to activate it.
Name:
Enter a name for the rule or select an application from the drop-down
menu. Select an application and click << to populate the fields.
IP Address:
Enter the IP address of the computer on your local network that you
want to allow the incoming service to. If your computer is receiving
an IP address automatically from the router (DHCP), you computer
will be listed in the "Computer Name" drop-down menu. Select your
computer and click <<.
TCP/UDP:
Enter the TCP and/or UDP port or ports that you want to open. You can
enter a single port or a range of ports. Separate ports with a comma,
and specify a range with a dash. Example: 24,1009,3000-4000
Schedule:
The schedule of time when the port forwarding rule will be enabled.
The schedule may be set to Always, which will allow the particular
service to always be enabled. You can create your own times in the
Tools > Schedules section.
D-Link DIR-615 User Manual

Port Forwarding

31