Wi-Fi Protected Setup - D-Link DIR-615 User Manual

Section 3 - Coniguration
Wi-Fi Protected Setup (WPS) allows you to easily and securely add compatible wireless devices to your network. WPS uses two
methods to add devices, Push Button Configuration (PBC) and PIN configuration. PBC allows configuration by pressing a WPS
button on the router and the new device, and the PIN method provides a PIN code which must be entered on the new device
or client in order to connect.
Enable: Check this box to enable devices to be added using the WPS
method.
Wi-Fi Protected Displays the current status of the WPS mode.
Setup:
Lock WPS-PIN Check this box to block configuration using the WPS-PIN method.
Setup: If this option is selected, devices can still be added using the WPS-
PBC method.
PIN: Displays the current PIN code for adding devices to your network.
Click the Reset PIN to Default button to return the PIN code to its
default setting. Click the Generate New PIN button to generate
a new PIN number. These settings will be saved once the Save
Settings button has been clicked.
Add Wireless Click the Connect your Wireless Device button to be taken
Station: through the steps of adding a new device. For more information
on adding devices using WPS, please refer to "Configure WPS" on
page 85.
D-Link DIR-615 User Manual

Wi-Fi Protected Setup

41