Windows® Xp - D-Link DIR-615 User Manual

Section 5 - Connecting to a Wireless Network
Windows® XP
Windows ® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service
Pack 2 users. If you are using another company's utility or Windows ® 2000, please refer to the user manual of your wireless
adapter for help with connecting to a wireless network. Most utilities will have a "site survey" option similar to the Windows
XP utility as seen below.
If you receive the Wireless Networks Detected bubble, click on
the center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View Available
Wireless Networks.
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
If you get a good signal but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
D-Link DIR-615 User Manual 92