Dhcp Server Settings - D-Link DIR-615 User Manual

Section 3 - Coniguration
The DIR-615 has a built-in Dynamic Host Control Protocol (DHCP) server. The DHCP server will automatically assign an IP
address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/
IP settings to "Obtain an IP Address Automatically. " When you turn your computers on, they will automatically load the TCP/IP
settings provided by the DIR-615. The DHCP server will automatically allocate an unused IP address from the IP address pool
to the requesting computer. You must specify the starting and ending address of the IP address pool.
Enable DHCP
Check this box to enable the DHCP server on your router. Uncheck to
Server:
disable this function.
DHCP IP
Enter the starting and ending IP addresses for the DHCP server's IP
Address Range:
assignment.
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may experience an IP address conflict.
Lease Time:
The length of time for the IP address lease. Enter the lease time in
minutes.
Always
Enable this function to ensure compatibility with some DHCP clients.
Broadcast:
D-Link DIR-615 User Manual

DHCP Server Settings

26