Dell Networking N4032 Configuration Manual page 50

Renumbering stack units
2.5.2.4
It may be desired to renumber switches in the stack. While this feature may be used at any time, it is most
commonly preferred after a switch has been removed and the remaining unit numbers are no longer
consecutive. While inconsecutive numbers or numbers out of order do not impact traffic in any way,
keeping an order can help quickly identify individual units and ports.
A switch may be any number between 1 and 6 as long as it is not already taken by another switch. If it is
desired to renumber the switch units to show consecutively numbered units (e.g. units 1-2-3, instead of 1-
2-4), it will require a brief reset of the stack and clear the configuration of the interfaces on the switch
receiving the new number. View the System > Stack Management > Stack Summary to see the current
numbering of each unit.
50 Stacking Dell Networking Switches: N4032, N4032F, N4064, N4064F