stack. In the event the new stack member unit being added has a newer firmware version, a downgrade is
Allow-
also allowed. To prevent the downgrade of the new stack member unit's firmware, disable the
Downgrade
only
option on the Master. This allows all new member units to synchronize with the Master
if
the firmware revision of the new members is older than that of the Master. Use the System > Stack
Management > Stack Firmware Synchronization page to view and set these features.
Save the configuration to the Startup-Configuration on the System > File Management > Copy Files page.
22
Stacking Dell Networking Switches: N4032, N4032F, N4064, N4064F