B.4.2 Wpa2-Psk W/Ccmp; B.4.3 Wpa2-Psk W/Tkip - Datamax RL3 User Manual

B.4.2 WPA2-PSK w/CCMP
1) Click on the 'WIFI' printer
component.
2) Click the 'Click the WPA/WPA2'
radio button.
3) Change (or confirm) the
following parameter settings:
Group Cipher: CCMP
Network Authentication Type:
WPA2-PSK
4) Type the Pass Phrase under the
"WPA_PSK_TKIP/ WPA2_PSK
settings" section. Note that Pass
Phrase is case sensitive.
5) After updating the "New Value"
column, click the Send button to
send these changes to the
printer.
B.4.3 WPA2-PSK w/TKIP
1) Click on the 'WIFI' printer
component.
2) Click the 'Click the WPA/WPA2'
radio button.
3) Change (or confirm) the
following parameter settings:
Group Cipher: TKIP
Network Authentication Type:
WPA2-PSK
4) Type the Pass Phrase under the
"WPA_PSK_TKIP/WPA2_PSK
settings" section. Note that Pass
Phrase is case sensitive.
5) After updating the "New Value"
column, click the Send button to
send these changes to the
printer.
B-5