Table of Contents
Advertisement
3) Connect the Power Supply to Power Jack of the printer.
4) Connect the AC Power Cord to the Power Supply.
5) Connect the AC Power Cord to an Electrical Outlet. For RL3 printers the printer will not turn on
automatically and must be turned on by pressing the
Do not operate the printer while it is connected to the AC Power Supply.
Battery Guidelines:
•
DO NOT store batteries in cold or hot conditions.
•
DO NOT drop the battery pack. In the event of a drop carefully inspect the battery plastic and contacts for damage. If you
suspect damage do not use the battery.
•
DO NOT use sharp tools to remove the pack. If a pack is punctured, cracked, immediately remove from the printer.
•
If the pack becomes extremely hot, or begins to smell DO NOT touch. Place immediately in a empty metal trash can.
•
DO NOT use the battery for any product other than the RL3/RL4 or designated printer.
•
DO NOT tamper with or attempt to disassemble the battery pack.
•
DO NOT subject the battery pack to water or liquids of any kind.
•
Be careful when setting the battery pack down on a flat surface, always store the battery pack with the contacts facing up.
•
DO NOT stack batteries with the contacts facing each other.
•
Replacement batteries come in individual boxes, store this way.
•
Batteries do have a shelf life of 1 year.
The printer is also designed with external
charging capabilities (RL4 models only) using
Datamax-O'Neil approved charging accessories.
For more information, see the instructions
included with the accessory.
312
6
button..
External Charging Contacts
Power Supply
AC Power Cord
Electrical Outlet
Power Jack
Advertisement
Table of Contents
