7-2 When performing auto-save functions using
the UPS service in Windows Server 2003/XP/
2000 + UPS service driver
When using the included "UPS service driver", the OS standard UPS service in Windows Server 2003/XP/2000
can be used. When there is a power failure, files can automatically be saved and the computer can be shut
down.
1. Connect the UPS to a computer.
* Only 1 computer can be connected to the UPS
Cable: Included connection cable (RS-232C or USB)
* The RS232C cable and USB cable cannot be used at the same time.
<RS-232C>
Connect to
RS-232C
terminal
Connector
Connect to RS-232C
port on PC
Included connection cable(RS-232C)
<USB>
Connect to
USB
terminal
Connector
Connect to USB
port on PC
Included connection cable(USB)
2. Install the included "UPS service driver" on the computer.
Software to install: UPS service driver
How to install: Refer to the separate "UPS monitoring software installation guide".
Connector
Connect to
RS-232C
connector on UPS
Connector
Connect to
USB Port
on UPS
Connect to
RS-232C
terminal
Connector
Connect to RS-232C
port on PC
Included connection cable(RS-232C)
Connect to
USB
terminal
Connector
Connect to USB
port on PC
Included connection cable(USB)
Connector
Connect to
RS-232C
connector on UPS
BU3002SW
Connector
Connect to
USB Port
on UPS
BU3002SW