Wlan Module - HP 15 Maintenance And Service Manual

WLAN module

Description
Atheros AR9485 802.11b/g/n 1x1 WiFi Adapter
Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter
Atheros AR9565 802.11bgn 1x1 WiFi + BT4.0 combo Adapter
Realtek RTL8188EE 802.11bgn Wi-Fi Adapter
CAUTION:
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact support.
Before removing the WLAN module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
6. Remove the top cover (see
To remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
antenna cable is connected to the WLAN module Aux terminal.
2. Remove the Phillips PM2.0×3.0 screw (2) that secures the WLAN module to the system board. (The
WLAN module tilts up.)
3. Remove the WLAN module by pulling the module away from the slot at an angle (3).
66 Chapter 4 Removal and replacement procedures
To prevent an unresponsive system, replace the wireless module only with a wireless module
Battery on page
Keyboard on page
Top cover on page
The #1 WLAN antenna cable is connected to the WLAN module Main terminal. The #2 WLAN
49).
55).
58).
Spare part number
675794-001
690020-001
733476-001
709848-001