Privacy Tab; Figure 1-11 Privacy Tab - Honeywell HCX13M Operator's Manual

Privacy Tab

Document 800-01794 Rev A
04/08
Use the Privacy tab to cover parts of your camera image with privacy masks.
Figure 1-11 Privacy Tab
You can configure up to eight rectangular privacy windows in the image to be masked
from view. Initially the dropdown list includes all currently-configured privacy windows
plus, at the end of the list, an entry for one un-configured privacy window. After that
window is configured, another un-configured privacy window selection is added to the
list.
To configure a privacy window:
1. Select NEW in the window field.
2. With your mouse, draw a rectangle (outlined in red) in the image screen of the
desired size. Click on the point on the image where you want the top-left of the crop
window to appear. Drag to where you want the bottom-right of the window, then
release the mouse button.
3. Click apply. Note that the window field now shows 1.
4. Repeat step 1 to step 3
To delete the current privacy window, click default. The current privacy window is deleted
and all subsequent privacy windows are renumbered downward by one. For example, if
window 2 is deleted, window 3 becomes window 2, window 4 becomes window 3, and so
on. The number of selections in the selected dropdown also decrease.
Click clear privacy windows link to delete all privacy windows.
To move or change the size of windows:
If there are multiple windows displayed, the selected window has its corners marked with
solid squares (see Figure 1-12). Click and drag on a corner or side of the selected window
to the desired location, then release the mouse button.
Click in the center of a selected window to move the window position without altering its
size.
HCX Series Network IP Camera Operator Guide
for up to eight privacy windows.
25