Hcxfinder; Installing Hcxfinder; Assigning An Ip Address - Honeywell HCX13M Operator's Manual

HCXFinder

Installing HCXFinder

Assigning an IP Address

Document 800-01794 Rev A
04/08
The HCXFinder application is a Windows based IP address configuration tool. Every time
you launch HCXFinder it automatically detects any cameras on the local network. You can
then assign a unique IP address for each detected camera.
The HCXFinder application is located on the CD-ROM accompanying your HCX Series
camera. Double-click hcx_finder.exe to launch the Install Wizard. Honeywell recommends
that you check for the most current version on the product download center at
www.honeywellvideo.com.
To assign an IP address to a detected network camera:
1. Launch HCXFinder. All detected network cameras are listed.
Figure 1-1 HCXFinder List of Detected Cameras
2. Highlight a camera in the list, then click Assign IP.
HCX Series Network IP Camera Operator Guide
15