Checking E-Mail And Ftp Status; Figure 1-22 E-Mail And Ftp Status - Honeywell HCX13M Operator's Manual

Checking E-mail and FTP Status

Document 800-01794 Rev A
04/08
Table 1-11 FTP Fields
Field Description
password The password that your camera uses to log into the FTP server.
file name The file names of the saved trigger images. You may use dynamic
variables in this field (see "Dynamic Variables" on page 41).
Note
file path The directory on the FTP server where your camera saves trigger
images. If this field is left blank, images will be saved in the first
directory encountered after logon. Enter a directory name, not a
file name.
Note
Figure 1-22 E-mail and FTP Status
This status dialog shows either success or the reason for failure of the last e-mail attempt.
Test your settings by clicking
in the status area.
E-mail Status—Troubleshooting
Result Description
message
Success E-mail sent successfully
No Mailhost No mailserver is specified in the Network Settings page.
File Open Your camera was unable to open the local file. Verify that the file
exists and is not corrupted.
Connect Your camera could not connect to the specified mailserver.
Negotiation Your camera could not negotiate SMTP with the specified
mailserver. Verify that the specified server is an SMTP server.
Send Your camera could not send the local file.
HCX Series Network IP Camera Operator Guide
Images are transferred in JPEG format.
For Unix file systems, a trailing '/' may be required. You
may use dynamic variables in this field.
. One of the following result messages displays
39