Trigger Settings; Figure 1-19 Trigger Settings Screen; Table 1-9 Trigger Settings Fields - Honeywell HCX13M Operator's Manual

Trigger Settings

36
Figure 1-19 Trigger Settings Screen
Your camera can capture image sequences in response to trigger events. Captured
images can be transferred by FTP and/or e-mail. Possible trigger events include:
• Lapse of periodic intervals
• Signals from external relay devices (certain models)
• Motion within the image.
Table 1-9 Trigger Settings Fields
Field Description
actions The method by which your camera transfers images in response
to a trigger event. Your camera can e-mail individual images,
and/or FTP image sequences.
motion Whether detected motion will cause trigger events. When
enabled, it is recommended that you also configure motion
detection windows within your camera image (see "Motion
Detection" on page 26).
Note
external input When enabled, a signal from an external relay device will cause a
trigger event.
Note
This item does not apply to all camera models.
Available on some models only.