Configuration; Figure 1-3 Live Window - Honeywell HCX13M Operator's Manual

Configuration

Document 800-01794 Rev A
04/08
To configure each connected network camera for optimal performance:
1. Launch HCX Finder, then do one of the following:
• Double-click a camera entry in the list, or
• Click Web Page,
The Live window opens.
Figure 1-3 Live Window
Note An alternative is to enter the IP address of the HCX device in the address field
of your Internet Explorer browser.
2. Click Settings.
3. When prompted, enter:
User name: root (default)
HCX Series Network IP Camera Operator Guide
17