Table of Contents
Advertisement
5.2.4
Layers
You can display multiple cameras in one window by defining layers. Cameras, web
pages or maps are then added to the layers using Drag and Drop. The user
interface can be customized to meet your specific requirements. The following layer
formats are available:
1x1, 1x2, 1x3, 2x1, 2x2, 2x3, 3x3, 3x4, 3x5, 4x4, 4x5, 4x6, 5x7
and
1+2, 1+3, 1+5, 1+6, 1+8, 1+12, 2+8, 4+9
All layers can be assigned to a user or group profile and will be available when the
program is started.
Note
You can also generate layers directly in Surveillance Mode or
Archive Mode. To do so, select Layer / Add layer. Select the
desired layer format.
These layers are only temporary, but can be stored. See chapter
Save local layer (page 50).
Generating layers
1. Create a new layer.
2. Enter a name in the Name field.
3. In the Type dropdown list, select the type.
4. Click on OK.
5. Click on Edit to edit the newly created layer.
6. You can now Drag and Drop cameras, web pages or maps from the user
view into the new layer.
7. Confirm with OK.
8. In the profiles, assign the layer to the respective user or group profile, if the
layer is to be displayed when the client starts.
NVR Software - SeeTec Surveillance
97
Advertisement
Table of Contents
