NVR Software - SeeTec Administration
6.3.1
Backup the management database
Starting MaxDB data backup
1. Click on Backup.
The backup will then be saved in \SeeTec\sapdb\backup.
Initiating backups by using SeeTec Surveillance
1. Start the SeeTec 5 client.
2. In the File menu, change to the Configuration Mode.
3. Click on System Management > Backup.
4. Click on Execute backup.
The backup will then be saved in the specified path.
6.3.2
Restoring management database backups
Restoring the MaxDB data backup
1. Click on Restore.
A dialog will be opened.
2. Select the desired backup file.
3. Click on Open.
168
Important
The backup must be stored on a local hard disk and must not be
located on a network drive or share.
If the backup file size is larger than the MaxDB, the restore process
aborts. Add another volume (see chapter Enlarging the storage
space (adding volumes) (page 169)) and restore the backup.