Installing Patches For The Seetec Server For 64-Bit Operating Systems; Adding Or Deleting Components; Installing A New Complete Version - SUPERLOLUX NI525A User Manual

Installing patches for the SeeTec server for 64-bit operating systems

1. Stop the SeeTec5_ENT service under Control Panel > Administrative Tools >
Services or use the SeeTec ServiceManager (Stop all SeeTec services).
2. Extract the ZIP file of the patch in the directory C:\Program Files\SeeTec
and overwrite any existing files.
3. Start the SeeTec5_CM service under Control Panel > Administrative Tools >
Services or use the SeeTec ServiceManager (Start all SeeTec services).
Important
Some server components are only available as 32-bit components.
For 64-bit operating systems, extract the following patches in the
directory for 32-bit programs (C:\Program Files (x86)\SeeTec):
 5.4.X_VersatileApplications_XX.zip
 5.4.X_ApplicationGateway_XX.zip
3.5.2

Adding or deleting components

1. Restart the installation, see chapter Standard installation (page 28).
2. Select Change program in the dialog for choosing the setup type.
3. Select the components that you want to add or delete.
®
In the Windows Control Panel, go to Programs and Features and select the
SeeTec 5 software. Then, add or delete the desired functions by using the
Uninstall/Change button.
Note
Ensure that the SeeTec installation medium is located in the same
path as the initial installation.
3.5.3

Installing a new complete version

1. Perform a backup of the MaxDB database.
2. Backup the directory conf of your current SeeTec Installation.
3. Stop the SeeTec5_ENT service under Control Panel > Administrative Tools >
Services or use the SeeTec ServiceManager (Stop all SeeTec services).
4. Uninstall the current version in the Control Panel under Add or Remove
Programs. All image and configuration files will be maintained.
NVR Software - Installation
33