Table of Contents
Advertisement
NVR Software - SeeTec client
4.1.3
Client configuration
1. In the File menu, select Client configuration to change the client settings:
Only the SeeTec administrator can open Client configuration.
Network tab
The Timeout for server requests option is used to increase request times in
Archive Mode. Consequently, no timeout will occur and no red beam will be
displayed in the player when performing large requests in Archive Mode.
The UDP or TCP port for image transmission determines the protocol and the port
used to transmit image streams of the cameras from the SeeTec server to the
client.
If you use multiple independent SeeTec 5 systems, you can automatically connect
the client to a backup server on network failure.
1. Enable the Automatically connect to backup server on network failure
option.
2. In the Name field, enter the name or the IP address of the backup server.
3. In the Port field, enter the port of the backup server.
4. Limit the Bandwidth when accessing servers with narrow-band connections.
First, double-click on the corresponding CameraManagement to select it.
5. In the following dialog, you can limit the maximum bandwidth using the
Max. bandwidth in kbit/s field.
42
Important
The following settings must be configured for each client and for
®
each Windows
login profile.
Advertisement
Table of Contents
