Start Patrols; Pausing Patrols; Stopping Patrols; Switching Positions - SUPERLOLUX NI525A User Manual

NVR Software - SeeTec Surveillance

Start patrols

1. Click on the desired patrol in the patrol window.
2. Click on

Pausing patrols

1. Click on

Stopping patrols

1. Click on

Switching positions

1. Click on

Automatically repeating patrols

1. Click on the desired patrol in the patrol window.
2. Click on
5.3.6

Digital zoom

Activating digital zoom
1. On the status bar of the camera, click on the left button ( ).
The magnifying glass icon will turn green. Zoom is now enabled.
2. Draw a rectangle in the camera image with your mouse.
This area then zooms in.
3. Optional: Optionally you can also use the + (plus) and - (minus) keys on the
numeric pad of your keyboard or the mouse wheel.
4. Draw another rectangle to increase the size of the image area.
5. Click in the image to restore the previous size.
142
Note
If an alarm scenario is triggered, the patrol will be stopped
automatically. After termination of the alarm scenario, the patrol is
restarted.
In Configuration Mode, patrols must be assigned to the respective
user or group profile.
.
.
.
or .
.