Table of Contents
Advertisement
NVR Software - SeeTec client
The following functions are simultaneously available only for one SeeTec
installation:
Menu File: Report Mode, Configuration Mode
Menu Info: System, Program, License
If you have logged on to multiple SeeTec Installations and open one of the menus
mentioned above, a selection dialog appears, in which you must choose the desired
SeeTec Installation. Then the chosen menu of the selected SeeTec Installation is
opened.
Login
1. Login to server with your user name and password.
2. Select File > Add SeeTec Installation.
3. Enter the host name and the IP address and the port of the server (default:
60000).
4. Select the SeeTec Installation you want to connect to from the selection
dialog.
Multiple selection can be made.
5. Optional: You can add one more SeeTec server via Create new SeeTec
Installation. Enter the host IP address and the port of the SeeTec server
(default: 60000).
6. Confirm by clicking the OK button.
7. Enter the user name and the password for each SeeTec Installation selected
previously.
8. Optional: You can activate NAT support and use Windows
Active Directory
You can accelerate the login by saving user name and password. When you activate
Log in user automatically, all information is saved and you can login directly
after confirming by clicking on OK.
48
Note
If connection to SeeTec Installation is interrupted, (due to network
problems etc.), SeeTec client tries to reconnect cyclically.
A maximum of 15 SeeTec Installations, with 100 cameras, each can
be connected.
®
login.
®
Advertisement
Table of Contents
