Table of Contents
Advertisement
After the installation, you can create additional zones in the SeeTec Administration,
see chapter Configure MultimediaDatabase (page 170).
12. Optional: Configure the Windows
13. Click on Install to start the installation.
3.3
Customized installation
With a customized installation you can install individual components on one
computer (for a distributed installation on multiple computers, see chapter
Distributed installation (page 29)):
SeeTec client
SeeTec OfflineViewer
Core services
CameraManagement and MultimediaDatabase
Important
In distributed installations, core services may only be installed on
one computer.
3.4
Distributed installation
Installation on multiple computers
A standard installation must be performed on the host computer first. See chapter
Standard installation (page 28).
1. Start the installation on the secondary server.
2. Select Custom in the dialog for choosing the setup type.
3. Optional: Change the path of the SeeTec Installation.
In 64-bit operating systems you can change the paths for the 32-bit and 64-bit
components.
4. Only install the CameraManagement and MultimediaDatabase components,
and optionally the client.
5. Under EntityManager, in the Host field, enter the IP address of the core
server.
Do not change the port.
6. In the IP address/host name for server communication dialog in the
Found IP addresses/host names dropdown list, select the IP address that
the SeeTec services will connect to.
NVR Software - Installation
®
firewall for MPEG-4 usage.
29
Advertisement
Table of Contents
