Table of Contents
Advertisement
Write protection of recorded image data
You can write-protect recorded image data to ensure that potentially important
data is not overwritten automatically.
You can protect a maximum of 75 % of the loop recording volume.
Enabling write protection
1. Right-click on a camera image.
2. Select the option Enable archive write protection.
3. Drag the time bar to the desired position.
4. Click on the Start button, then on Stop to select a time range.
The time range to be protected is shown in yellow in the time bar.
5. Confirm your selection with the OK button.
Removing write protection / Status request
1. Click on Write protection of recordings in the Extras menu.
A list of all cameras embedded in the system is displayed.
2. Select the cameras for which you want to start a status request.
Selecting multiple items is possible.
3. Click on Query.
In the The following write-protected recordings are available field, all
protected areas of the cameras selected before are displayed.
4. Select the areas for which you want to remove the write protection.
Selecting multiple items is possible.
5. Click on Remove write protection.
The image data without write protection will be overwritten according to loop
recording.
NVR Software - SeeTec Surveillance
161
Advertisement
Table of Contents
