Tuner Operation; Auto Memory Entry; Station Preset Memory; Preset Tuning - Kenwood KDC-BT742U Instruction Manual

Tuner Operation
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1
Enter Auto Memory Entry mode
Select "AUTO MEMORY/~
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Open Auto Memory Entry
Turn the [AUD] knob to select
"YES'~
and then
press the [AUD] knob.
When 6 stations that can be received are put in the
memory, auto memory entry closes.
Station Preset Memory
Putting a station in the memory.
1
Select the frequency to put in the memory
Push the [AUD) knob towards right or left.
2
Enter Preset Memory mode
Press the [SEARCH) button.
3
Select the number to put in the memory
Turn the [AUD) knob or push it towards up or
down.
4 Determine the number to put in the memory
Press the [AUD] knob for at least 1 second.
Cancelling the Preset Memory mode
Press the [SEARCH] button.
14
I
KDC-BT742U/ KDC-X493/ KDC-MP442U
Preset Tuning
Recalling the stations in the memory.
1
Enter Preset Tuning Select mode
Press the [SEARCH] button.
2
Select a desired station in the memory
Turn the [AUD] knob or push it towards up or
down.
3
Recall the station
Press the [AUD) knob.
Cancelling Preset
Tuning
Press the [SEARCH) button.
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT) button on the remote
control.
"- - - -" is displayed.
2
Enter the frequency
Press the number buttons on the remote
control.
Example:
Cancelling Direct
Access Tuning
Press the [DIRECT) button on the remote
control.
~
~
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.